Epoxy Penetrating Primer

R469.58R1,651.14

GENERAL DESCRIPTION
ElaganTech ET-7101 Clear Epoxy Penetrating Primer is designed to be absorbed by marbelite or cement, to bind to the substrate and to act as a chemical key and to bond with subsequent coats. It is an integral part of most epoxy floor coating systems.

PROPERTIES

  • Excellent adhesion to concrete
  • Can be used as a dust sealer
  • Good water and chemical resistance


CHEMICAL RESISTANCE
Resistant to most dilute acids and alkalis, petroleum products, detergents and water.

RECOMMENDED AREAS FOR USE

  • Walls and floors in:
  • Factories and warehouses
  • Parking garages
  • Breweries and abattoirs
  • Dairies and kitchens
  • Nuclear decontamination
  • Can be used as a dust sealer
  • Also suitable as a high gloss top coat
SKU: N/A Category: Tags: , ,

Description

ElaganTech Epoxy Penetrating Primer (ET-7101)

GENERAL DESCRIPTION
ElaganTech ET-7101 Clear Epoxy Penetrating Primer is designed to be absorbed by marbelite or cement, to bind to the substrate and to act as a chemical key and to bond with subsequent coats. It is an integral part of most epoxy floor coating systems.

PROPERTIES

  • Excellent adhesion to concrete
  • Can be used as a dust sealer
  • Good water and chemical resistance


CHEMICAL RESISTANCE
Resistant to most dilute acids and alkalis, petroleum products, detergents and water.

RECOMMENDED AREAS FOR USE

  • Walls and floors in:
  • Factories and warehouses
  • Parking garages
  • Breweries and abattoirs
  • Dairies and kitchens
  • Nuclear decontamination
  • Can be used as a dust sealer
  • Also suitable as a high gloss top coat

SURFACE PREPARATION
All surfaces must be clean, sound and free of oil, dirt and dust. Concrete surfaces should be abrasive blasted, diamond grind or acid etched to remove laitance. Moisture content should not exceed 10%.

APPLICATION

  • Thoroughly mix the epoxy and activator in the proportions give. Mechanical slow mixing is required
  • Apply by brush, roller or spray.
  • Over-coating may proceed as soon as the applied product is touch dry.

CLEANING EQUIPMENT

Clean all equipment immediately after use with ElaganTech Water Soluble Brush Cleaner.

SPECIAL NOTES

This material contains solvents and is flammable.

Although 101 Penetrating Epoxy Primer is relatively non-toxic, it is recommended that the normal precautions when dealing with conventional epoxy resin systems are adhered to.

Refer to the relevant 16 point Material Safety Data Sheet.

HOW TO SPECIFY

All suitably prepared surfaces to be primed with ElaganTech ET-7101 Penetrating Epoxy Primer @ 6 to 8m2/litre according to the manufacturer’s instructions.

Additional information

Quantity

1 Litre, 5 Litres

Reviews

There are no reviews yet.

Be the first to review “Epoxy Penetrating Primer”

Your email address will not be published. Required fields are marked *